Insulation, heat pump or solar: what order should you upgrade in?

The short answer
There is a right order to upgrade a home, and getting it wrong is expensive. The rule the whole industry now agrees on is fabric first: fix the building before you fix the heating.
In plain terms, work from cheapest to most expensive, and let each step shrink the one after it:
- Free and near-free: turn things down and time them properly.
- Draught-proofing and controls: a weekend and a few tens of pounds.
- Insulation: loft, then cavity, then the harder walls.
- The big low-carbon kit last: heat pump, solar, battery, EV charging.
The reason the order matters so much is that a well-insulated home needs a smaller, cheaper heat pump and a smaller solar and battery system to do the same job. Buy the big kit first, before you have insulated, and you pay to heat or power the heat leaking out of the walls, often for a decade or more.
Fabric first is the principle that you fix the building, its insulation and airtightness, before you change the heating system, so the new system can be smaller and run cheaper. The order in one table:
| Tier | Work | Rough cost |
|---|---|---|
| 1 | Turn down and time (thermostat, hot water) | Free |
| 2 | Draught-proofing and controls | Tens of pounds |
| 3 | Insulation: loft, then cavity, then walls | Mid-cost |
| 4 | Heat pump, solar, battery, EV charging | Big-ticket |
Why the order saves you twice
Most guides treat these upgrades as a shopping list. They are actually a sequence, because the early, cheap steps change what the later, expensive ones need to be.
Take heating. A heat pump is sized to your home’s heat loss, how fast it leaks warmth on a cold day. Insulate the loft and walls first and that heat loss falls, so the installer can specify a smaller unit, smaller radiators and a cheaper install. Skip the insulation and you buy a bigger heat pump to overcome losses you could have removed for a fraction of the cost, then pay to run it harder every winter after that.
The same logic runs through the whole list. Draught-proofing makes any heating system feel warmer at a lower thermostat setting. Insulation lowers the demand a solar and battery system has to cover. Getting the cheap fabric work done first means every expensive thing you buy afterwards is smaller, and its running cost is lower for its entire life. That is the “saves you twice” effect: once on the purchase, and again on every bill.
The order, step by step
Tier 1 — Free: turn it down and time it
Start with the changes that cost nothing and prove out in weeks.
- Thermostat. Turning the room thermostat down by one degree trims roughly 10% off heating energy, the single biggest free lever in most homes.
- Hot water. If you have a cylinder, put it on a timer rather than leaving it on constantly.
- Standby and appliances. Switch off the standby loads worth bothering with, and know which appliances actually cost the most to run so you focus effort where it counts.
None of this needs a tradesperson or a purchase. It is where everyone should begin.
Tier 2 — Cheap: seal the leaks and control the heat
The next tier is a weekend of DIY and a modest spend, and it is the best value on the whole list per pound.
- Draught-proofing: foam strips, brush seals, a chimney draught excluder. Inexpensive, quick, and it lifts comfort immediately.
- Heating controls: smart radiator valves to heat only the rooms you use, and on a gas boiler, lowering the flow temperature so it runs in efficient condensing mode.
These do not need to wait for anything, and they make everything above them in the list work harder.
Tier 3 — Mid-cost: insulate the building
This is the heart of “fabric first”, and the order within it matters too, cheapest and highest-impact first.
- Loft insulation is usually the best-value major insulation job, especially topping up a thin existing layer.
- Cavity wall insulation, if your walls are suitable, is one of the highest-saving fabric upgrades for a typical home.
- Solid wall insulation (internal or external) is the big one for older homes, higher cost, higher saving, and worth planning around other work.
- Be cautious with heavily marketed products that do not always deliver, such as spray foam, and treat glazing as a comfort and fabric decision rather than a quick payback.
Insulation is where the home’s underlying demand actually falls, which is exactly why it belongs before the expensive kit.
Tier 4 — Big-ticket: the low-carbon system, sized to a better house
Only now, with a sealed, insulated, well-controlled home, do the large purchases make sense, because they can be specified smaller and run cheaper.
- Heat pump: now sized to a lower heat loss, so a smaller unit, often smaller radiator changes, and lower running cost for its whole life.
- Solar panels and a home battery, ideally considered together, sized against a home that already uses less.
- EV charging on the right tariff, which pairs neatly with solar, a battery and a time-of-use deal.
Do this tier first, and you over-buy and over-spend to serve a leaky house. Do it last, and every unit is smaller, cheaper and cheaper to run.
Where your household should actually start
The ladder is the general rule, but the right first rung depends on your home. A few common starting points:
- Gas-heated homeowner, staying put a while. Follow the ladder straight up: free tweaks, draughts and controls, then loft and walls, then look at a heat pump or solar when the fabric is done.
- Oil or LPG household, often rural. Running costs are high, so the payback on insulation is even stronger, do it first, then a heat pump becomes both cheaper to fit and dramatically cheaper to run than oil.
- Flat or rented home. You may not control the walls or the heating system. Concentrate on Tier 1 and Tier 2, the free and cheap wins you can make without structural work or a landlord’s sign-off.
- Already have solar. You are partway up the ladder from the top. Make sure the cheap fabric and control steps are done, then a battery is often the logical next move to use more of what you generate.
The point is not that everyone does identical work. It is that everyone spends cheapest-first, and never buys big kit for a house they could have made smaller-demand for far less.
How much the right order actually saves
It helps to see the effect in pounds rather than in principle. Consider a typical 1930s three-bedroom semi that decides to go all the way to a heat pump and solar over a few years.
Do it in the wrong order, heat pump first, and the installer sizes the unit to the home’s current, leaky heat loss. That means a larger, dearer heat pump, possibly more radiator changes, and higher running costs every winter, because the pump is working against draughts and thin insulation that are still there. The solar system is then sized against a home that still uses a lot, so it too is larger than it needed to be.
Do it in the right order and the picture changes at every step. First the free and cheap tier trims demand for almost nothing. Then loft and cavity insulation cut the heat loss substantially, so when the heat pump is finally specified, it can be a size or two smaller, with fewer radiator changes and a lower install price. Because the fabric is better, it also runs at a lower flow temperature, which lifts its efficiency and lowers the running cost for its whole life. Finally, solar is sized against a home that already uses less, so a smaller array does proportionally more.
The individual savings are covered in each linked guide, and they stack. The reason the order matters is that these are not independent line items; each early step shrinks the cost and the size of every later one. Across a full upgrade path, sequencing correctly rather than randomly routinely saves a household thousands of pounds on the capital alone, before you count the lower bills that follow.
A worked upgrade path
To make it concrete, here is a sensible multi-year path for that same semi, each step setting up the next:
- Year one, near-free: turn the thermostat down a degree, set the hot-water timer sensibly, and tackle the obvious draughts. Cost: almost nothing. Effect: an immediate, small bill reduction and a warmer-feeling home.
- Then, cheap controls: smart radiator valves for the rooms you actually use, and, on the existing gas boiler, a lower flow temperature. Still inexpensive, and it makes the current system cost less to run while you plan the bigger jobs.
- Next, insulation: top up the loft, then insulate the cavity walls if they are suitable. This is the step that genuinely lowers the home’s heat demand, and therefore the step that changes what the big kit needs to be.
- Finally, the big kit: with the fabric done, get heat-pump quotes and, if the roof suits it, solar. Both are now specified against a smaller, better-behaved home, so both are smaller, cheaper and cheaper to run than they would have been at the start.
Notice that nothing here is wasted or redone. Each step is worth doing on its own merits, and it also lowers the cost of everything above it. That is the whole argument for order in a single sentence: cheap work first is not just cheaper, it makes the expensive work cheaper too.
The one time to jump the queue
There is a sensible exception. If a major system dies, replace it in the context of the whole plan, not in a panic.
If your boiler fails, that is the natural moment to seriously price a heat pump rather than defaulting to another gas boiler by reflex, especially with grant support available. If you are already having scaffolding up, doing external wall insulation or solar at the same time can save on access costs. And if a grant or scheme has a deadline, timing can override the strict cheapest-first order.
The queue is a default, not a straitjacket. The mistake to avoid is the opposite one: spending big on the heating or generation system while the loft is still bare and the doors still whistle.
Common questions
Should I really insulate before getting a heat pump?
In almost all cases, yes. A heat pump is sized to your home’s heat loss, so insulating first lets the installer fit a smaller, cheaper unit that costs less to run for its entire life. Buying the heat pump first means paying to heat losses you could have removed far more cheaply.
Is solar or insulation the better first move?
Insulation, for most homes. It reduces the demand that solar then has to cover, so you can fit a smaller, cheaper solar and battery system afterwards. Solar generates power; insulation stops you needing as much in the first place, which is cheaper per pound saved.
What if I can only afford one thing this year?
Do the cheapest tier that is not yet done. For most homes that means draught-proofing and controls, then loft insulation, long before any big purchase. These give the fastest payback and improve comfort immediately, and they make any later big kit smaller and cheaper.
Does the order change if my boiler is about to fail?
Yes, that is the main exception. A dying boiler is the right moment to price a heat pump seriously rather than reflexively fitting another gas boiler. Replace failed kit in the context of your whole plan, and use scaffolding or grant deadlines as reasons to reorder sensibly.
Do I need an assessment before I start?
Not for the cheap early steps, which anyone can do. For the big kit, though, a heat pump needs a proper heat-loss survey and solar needs a roof assessment, both of which are far more useful once the insulation is done, because they measure the improved home rather than the leaky one. An EPC gives a rough starting point, but it is not a substitute for a proper survey when you reach the big-ticket tier.
Products that help
The cheap first two tiers need only a few products: draught-excluder tape and brush strips, a hot water cylinder jacket if your tank is bare, and smart radiator valves such as tado° smart radiator thermostats for rooms you use at different times. For DIY loft top-ups, compare loft insulation roll or browse loft insulation at Screwfix. The big-ticket tier needs an accredited installer, not a shopping basket. Some links here are affiliate links, so we may earn a small commission at no cost to you; it never changes our advice. How we make money.
Sources
- Energy Saving Trust, home insulation and energy efficiency guidance. Checked 31 August 2026.
- GOV.UK, find ways to save energy in your home. Checked 31 August 2026.
- Ofgem, Boiler Upgrade Scheme (heat pump grant context). Checked 31 August 2026.
The “fabric first” ordering and the point that insulation lets a heat pump be sized smaller are long-standing energy-efficiency principles, not our own claim; the specific savings for each individual step are covered, with their own sources, in the linked guides. This page is a decision framework, not a quote for your home. Reviewed by Adam, our editor. See our editorial methodology, who we are, and our corrections policy if you spot something wrong.
